Brick machine Turkey can produce all kinds of block, stand brick, perforated block and gras planting tiles by changing different moulds, is an ideal equipment for producing new wall materials. It adopts PLC control system, is with characteristics of human-computer interface and automatic fault diagnosis. The vibration system is controlled by electro-hydraulic proportional valve, which realizes the low-frequency feeding and high-frequency vibration molding. The distributing system with multi-row mixing fork can discharge the material into the mould box quickly and evenly. If you want to know more, you can go ahead about components of this machine.
1. When using the machine, must install it on a firm ground, secure with a stand or leg rest, can’t replace it with tyres.
2. Each running of block making machine Turkey, should check whether clutch, brake and steel rope are in good condition. No foreign matter is allowed in the roller.
3. pay attention to the rising of hopper, no one can walk or stay under the hopper.
4. When run the machine, can’t push the tool deep into the roller.
After the installation of machine, must test run it, test run including idle and load test.
1. Before the test run, the machine shall be inspected visually, tighten the parts that have not been tightened, clear the surface of the rotary table, inside the transverse hole and other transmission parts.
2. At the same time, lubricating sufficient oil to each point. Then manually move the machine.
3. The operation time shall not be less than 2 hours. During the no-load test, carefully observe the bearing temperature, gear engagement, motor temperature rise and lubrication, and pay attention to the working condition of the brick pressing mechanism and the rail top brick.
4. After passing the no-load test, gradually increase the feed quantity, conduct load test, and then check the working condition of each part under the load. The load test shall be no less than 4 hours.
If you want to get a quality machine, the first thing you need to do is looking for reliable block making machine Turkey suppliers. There are many things need to pay attention when you select manufacturer, such as, scale of factory and office, professional degree of technicians and engineers, pre-sale service, on-sale service and after-sales service, etc.
We AIMIX GROUP CO.,LTD attaches much more importance to after-sales service, up to now, we have established six LBS centers for our customers, they are Pakistan, Uzbekistan, Indonesia, Philippines, Sri Lanka, etc, future, we will set up more service center for you, timely solve your problems and removes your worries!
If you are interested in our brick machine Turkey, welcome to contact us! We will give you best price!