Block making machine in Ethiopia has unique compulsory feeding device, can utilize cement, river sand, macadam, fly ash, slag, cinder, ceramsite etc to produce quality bricks. Furthermore, by changing different moulds, our machine can produce standard bricks, hollow blocks, perforated brick and paving blocks with different specifications. For raw materials are very extensive, users can make a survey about your local resource before investing a block machine in Ethiopia, which will be very cost-saving.
Features of block making machine in Ethiopia
1. Hydraulic system adopts special proportional directional valve, can adjust any movement in all directions, which ensures reliable and flexible running.
2. PLC intelligent control system, achieve program interlock. Start mode of motor frequency conversion makes equipment has bigger vibratory force. The whole production process is without noise.


3. Ethiopia block making machine uses advanced electronic control technology and reliable hydraulic system, automatic control makes running reliable and easy.
4. Table mould pressing vibration mode can liquefy concrete and exhaust, ensure bricks has high compactness. So manufacturing block machine in Ethiopia is very suitable for production of high-compactness bricks. And operator can shape after stacking.




Operation manual of brick making machine in Ethiopia
1. Operator should run the machine according to the specifications strictly, when not working or overhauling, must cut off the power supply.
2. We AIMIX will help you train local operator to be professional in working principle and procedure. If necessary, our engineers will teach some daily maintenance.
3. Raw materials shall not contain aggregate or other impurities larger than 10mm, especially solid things, which will damage the block making machine in Ethiopia.
4. Users should clean out the sticking substance on the pallet. Moreover, pallet production should meet the stipulations, the diagonal error is less than 5mm.
5. When the Ethiopia brick making machine was running, non-operators should be far away from the equipment, no one no touching is allowed, which avoid personal accident.
6. Long time no-load operation is not allowed.


Installation and debug of block making machine in Ethiopia


If you choose our machine, our engineer will go to your city and help you finish the installation. What’s more, they will test run and debug the cement block making machine sale in Ethiopia. Most importantly, our engineer and technicians will teach your local operator how to run and maintain the machine. The followings are some issues need to pay attention to when you install the brick machine.
1. Adjust the gap between scraper of feeding machine and bottom of cylinder, which should be no more than 2mm.
2. The gap between regulating ring upper cylinder and feed tray should be o.5-1mm.
3. Make adjustment to orbital altitude, after adobe is finished, surface of mould should be 1mm higher than the disk surface.
4. Adjust the eccentric shaft of pressing device, makes it can produce standard adobe.


When operator finish the installation, next step is to test run. If you are interested, please leave us message on the contact form below, our professional engineer will tell you how to test run the block machine in Ethiopia.
If you want to produce hollow blocks, we also have hollow block machine for you, but before you placing an order, you need to ask several manufacturers for hollow block machine price Ethiopia, comparing different prices, you can pay a visit to their factory and workshop, so that you can have a clear idea about their comprehensive strength.
About us
Our factory




After-sales service center at abroad






We AIMIX have set up 5 LBS center in Pakistan, Philippines, Sri Lanka, Uzbekistan and Indonesia. Our parent company is located in Henan, China. Warmly welcome you to contact us for best block machine price in Ethiopia.