AIMIX sell many capacities of batching plant in Myanmar ranges from 25m3/h to 120m3/h. And there are stationary type and mobile type for your selection.
It has wide applications in houses, buildings, water engineering, jam, parking lots, wharf, road repair, flood control, etc.
Here is the case in 2020, we installed one set of AJ-35 hopper-type concrete batching plant in Myanmar. Our user not only bought a concrete batching plant in Myanmar, but also a concrete transit mixer, and a diesel concrete pump. You can look at the pictures and video below.
AJ-25, AJ-35, AJ-50, AJ-60, AJ-75, AJ-90, and AJ-120
| Model | AJ-25 |
| Theoretical Productivity (m3/h) | 25 |
| Mixer Model (Mixer Output L) | JS500 |
| Mixer Power (kW) | 18.5 |
| Mixing Cycle Period (s) | 67 |
| Rated Input Volume (Model of Batching Machine L) | 800 |
| Standard Aggregate Bin Capacity (m3) | 3×3 |
| Category of Aggregate | 2/3 |
| Overall Weight (ton) | ≈15 |
| Installation Power (kW) | ≈65 |
| Model | AJ-50 |
| Theoretical Productivity (m3/h) | 50 |
| Mixer Model (Mixer Output L) | JS1000 |
| Mixer Power (kW) | 2×18.5 |
| Mixing Cycle Period (s) | 72 |
| Rated Input Volume (Model of Batching Machine L) | 1600 |
| Standard Aggregate Bin Capacity (m3) | 3×8 |
| Category of Aggregate | 3/4 |
| Overall Weight (ton) | ≈23 |
| Installation Power (kW) | ≈100 |
| Model | AJ-60 |
| Theoretical Productivity (m3/h) | 60 |
| Mixer Model (Mixer Output L) | JS1000 |
| Mixer Power (kW) | 2×18.5 |
| Mixing Cycle Period (s) | 60 |
| Rated Input Volume (Model of Batching Machine L) | 1600 |
| Standard Aggregate Bin Capacity (m3) | 4×7 |
| Category of Aggregate | 4/5 |
| Overall Weight (ton) | ≈40 |
| Installation Power (kW) | ≈110 |
AJY-25, AJY-35, AJY-50, and AJY-60
| Model | AJY-35 |
| Theoretical Productivity (m3/h) | 35 |
| Mixer Model (Mixer Output L) | JS750 |
| Mixer Power (kW) | 30 |
| Mixing Cycle Period (s) | 72 |
| Rated Input Volume (Model of Batching Machine L) | 1200 |
| Standard Aggregate Bin Capacity (m3) | 2×5 |
| Category of Aggregate | 2/3/4 |
| Overall Weight (ton) | ≈22 |
| Installation Power (kW) | ≈73 |
| Model | AJY-60 |
| Theoretical Productivity (m3/h) | 60 |
| Mixer Model (Mixer Output L) | JS1000 |
| Mixer Power (kW) | 2×18.5 |
| Mixing Cycle Period (s) | 60 |
| Rated Input Volume (Model of Batching Machine L) | 1600 |
| Standard Aggregate Bin Capacity (m3) | 3×8 |
| Category of Aggregate | 2/3/4 |
| Overall Weight (ton) | ≈26 |
| Installation Power (kW) | ≈100 |
The concrete production plant adopts different configurations according to the different needs of users, but the main configuration is the same, which can be divided into five parts, mixing machine, material weighing system, material conveying system, material storage system, and control system. AIMIX batching plants in Myanmar declares one point: the main configuration of concrete production lines with different specifications is the same, the difference is only in the size of the production capacity.
1. Mixing host
2. Material weighing system
The material weighing system is a key component that affects the quality of concrete and the cost of concrete production. It is mainly divided into three parts: aggregate weighing, powder weighing, and liquid weighing. The production of different specifications of concrete mainly depends on the weighing system. A precise weighing system can ensure the production of high-quality concrete.
3. Material conveying system
The material conveying system is mainly composed of three parts: aggregate conveying system, powder conveying system, and liquid conveying system.
a. Aggregate conveying: At present, the conveying of batching plant Myanmar has two modes: hopper conveying and belt conveying. The advantages of hopper lifting are its small footprint and simple structure. The advantages of belt conveying are large conveying distance, high efficiency, and low failure rate.
b. Powder conveying; the powder materials available for concrete are mainly cement, fly ash, and mineral powder. At present, the commonly used powder conveying method is screw conveyor conveying, and large concrete mixing plants use pneumatic conveying and scraper conveying. The advantages of screw conveying are simple structure, low cost, and reliable use. Of course, if the customer has special requirements for powder, we can deal with it as appropriate.
c. Liquid transport mainly refers to water and liquid additives, which are transported by water pumps and additive pumps respectively.
4. Material storage system
The material storage methods available for concrete are basically the same. Aggregates are stacked in the open air (there are also closed silos for large-scale commercial concrete mixing plants in cities); the powder is stored in a fully enclosed steel structure cement silo, we have horizontal cement silo, welded type cement silo, and bolted type cement silo; steel for admixtures structural container storage.
The control system of the concrete batching plant for sale in Myanmar, Burma is the central nerve of the whole set of equipment. The control system has different functions and configurations according to the different requirements of users and the size of the batching plant in Myanmar. Generally, the control system of the small concrete mixing plant available on the construction site is simpler, while the system of the large concrete mixing plant is relatively more complicated.
In addition to the above-mentioned main system, we also have a pneumatic system. It plays an important role in the concrete batching plant in Myanmar. Mainly include air compressor, air rope, pneumatic triplet. Pneumatic triple parts are mainly composed of pressure-reducing valve, filter, and lubricator. Installed at the outlet of the air compressor gas, it plays the role of filtering, decompression, and oil mist in the pneumatic system. Filtration is to separate impurities such as condensed water and sludge in the compressed air so that the compressed air can be initially purified; the pressure can be adjusted through the triplex to adjust the outlet pressure; the oil mist is sprayed out to lubricate the air valve.
Working process: Batching—weighing—conveying—mixing—unloading
There will be a list of Myanmar batching plant companies on google or yahoo search engines. So if you are looking for a quality batching plant in Myanmar, just search” batching plant company in Myanmar”, you will get a lot of results. And then look through them one by one and record much more reliable companies, this is the first step.
Secondly, you need to make a comparison and select three to five famous manufacturers. And according to their guide, visit them one by one. Only by visiting the factory, you will know whether this supplier is reliable or not.