Block Molding Machine

When molding bricks, the block molding machine usually has complex process. And many producers worry where they can get the materials and whether the materials are expensive. Since the professional brick made machine appeared on the market, the users will not worry. The raw materials of bricks are easy to get, such as slag, grave and sand. Even the construction rubbish and industrial waste can be used as the raw materials, so it is easy to get the cheap materials to make bricks. The bricks moulding machine provided by Aimix group, makes bricks without burning, and the simple process ensures easy operation. We have ABM-3S, ABM-4SE, ABM-6S, ABM-8S, ABM-10S, ABM-12S and ABM-18S, no matter what capacity block machine you need, we can try our best to customize one according to your needs.

Recent news

ABM-4SE was going to Philippines

ABM-3S block molding machine was sent to Bangladesh

Configuration of block molding machine

ABM-3S can be equipped with a JW500 concrete pan mixer or JDC350 single shaft concrete mixer.
ABM-4SE can be with a JSS double spiral blades twin shaft concrete mixer, the discharge height is about 2m.
ABM-6S can be equipped with JS500 twin shaft concrete mixer.
ABM-8S, ABM-10S and ABM-12S are equipped with JS750 twin paddle mixer.

Good-quality Concrete Block Moulding Machine For Sale

Compulsory mixing and distributing materials: The machine adopts the forcible mixer and distributor. When the mixer starts to work, the mixing blades are driven by the rotating shaft, and then the materials were blended well due to the compulsory mixing. Before molding the bricks, the distributing box starts to wiggle. The motor drives the chain wheel to rotate, so that the the distributing tooth will rotate for 360 degree continuously and distribute the materials into the mold box evenly.

How to prolong the service life of block molding machine-regular maintenance and check

1. User should keep the block molding machine clean, clear away wastes and greasy dirt, scrub the outside surface of the block machine;

2. Should regularly check and adjust the the gap among all parts of block machine, to ensure the normal production;

3. If the machine needs to have a long-term storage, should do protection against corrosion for all of parts, and check every three months, when use it, it is necessary to rub the machine, and oil again;

4. When the vulnerable partis worn and tear badly, greatly affects the normail function of the brick machine, should replace the old with new parts;

5. When the block molding machine goes into operation, should do a minor repair and check half a year, do an overhauling check once a year.

Please send your inquiry in the form below, we will reply to you within 2 hours.